AUTOMATIC FEEDER MACHINES

•  FULLY AUTOMATIC
•  CONSISTENT AND ACCURATE DOSAGE
•  90KG TO 250 KG CAPACITY OF TREATMENT
•  CAN INJECT INTO PRESSURIZED SYSTEMS
•  REMOVABLE TIMER COMPARTMENT FOR EASY  MAINTENANCE.
•  220-240 / 110 VOLT MACHINES AVAILABLE.
• 1-2 BAR DRY COMPRESSED AIR REQUIRED
•  QUICK AND EASY INSTALLATION.

The KL-SERIES Automatic feeder is designed to inject powder as an airborne dust into the combustion chamber. The pneumatic delivery system will provide a constant dose rate of treatment. Electronic timing units give an extensive time range, allowing the KL-SERIES to dose accurately across the whole spectrum of boiler plant.

Boiler fouling is a continuous process that is directly determined by the amount of fuel burnt. The flexibility of the SAPEC feeders allow us to ensure that the SAPEC treatment is always present in the combustion zone, where it can be effective.

In a typical installation the treatment is injected into the boiler at 3 to 15 minute intervals thereby making the SAPEC addition a continuous process also.

The unit is free standing and can inject into pressures of up to 72 inches WG. Normally floor mounted it can deliver the treatment to a height of 40 ft.

The KL-Injection machines are now also manufactured under licence in South Africa.